characteristic:
Using polyvinyl chloride film as the substrate, coated with thick resistant rubber adhesive, with good quality and moderate viscosity, suitable for gold plating and gilding on FPC surfaces, and can be used for stamping.
physical properties
| total thickness | tensile strength | elongation | adhesion | acid resistance |
|---|---|---|---|---|
| 0.1±0.02mm | ≥5KG/25mm | ≥180% | 0.05～0.15N/in | Soak the tape sample in a hydrochloric acid solution with a pH of 3 at room temperature for 48 hours. The tape substrate remains unchanged, and the adhesive surface still has viscosity. |
quality characteristics
We can provide different specifications of adhesive coating according to customer requirements;
The adhesive layer is evenly coated, and there will be no adhesive residue after removing the anti coating film produced;
Different specifications of adhesive anti coating films can be produced and used under normal operating conditions without causing infiltration;
The product has no irritating odor.
Storage matters
Store under room temperature and indoor humidity conditions (25 ± 3 ℃).
Storage time is 6 months.
Note: The above physical property data are average values and are for reference only. Users should confirm the practicality of the product.
Contact: Mr. Zeng
Mobile phone: 13828881856
Landline: 0755-27099880
Email: honghuaxinsales@163.com
Address: 2nd Floor, Building A, Sha San Dongfeng Industrial Zone, Shajing Street, Bao'an District, Shenzhen
