Product Details
| Chinese name | TPX high-temperature resistant adhesive release film |
|---|---|
| English name | Temperature Plastic-film resistance |
| Packing Specification | Carton packaging, 270mm/540mm wide * 500M/roll (sheet materials can be provided according to demand) |
| Product features | Applied in the process of rapid press bonding flexible circuit boards, it can isolate the overflow of solder pads and gold fingers, and control the problems of insufficient and foaming of the circuit pressing, avoiding the occurrence of mutual transfer between products |
| Appearance requirements | It is white in color, with a smooth film surface and no defects such as bubbles, pinholes, or foreign impurities. The edges are neat and undamaged |
| Suggest using temperature | -100～195℃ |
| total thickness | 0.12mm±10% |
| width | 270mm/540mm±3mm |
| density | 0.925g/cm³ |
| Tensile elongation at break (MD 23 ℃/50% RH) | 110 |
| Tensile strength (MD 23 ℃/50% RH) | 59MPa |
| Operation precautions | Each high-temperature resistant release film can only be used once and cannot be reused; Immediately separate the release film from the product after the press is turned on |
| Storage conditions for raw materials | Temperature 25 ℃; Humidity<65%; Save time 16> |
Contact: Mr. Zeng
Mobile phone: 13828881856
Landline: 0755-27099880
Email: honghuaxinsales@163.com
Address: 2nd Floor, Building A, Sha San Dongfeng Industrial Zone, Shajing Street, Bao'an District, Shenzhen
